Search results for "Intergranular corrosion"
showing 10 items of 19 documents
Mechanism of brittle fracture in a ductile 316 alloy during stress corrosion
1990
Abstract The ductile f.c.c. 316 alloy is shown to exhibit brittle transgranular (and intergranular) stress corrosion cracking in a 153°C MgCl2 solution at free corrosion potential. Tests on smooth and pre-cracked specimens are performed to identify the mechanisms of fracture. Transgranular cracking is related to both a discontinuous microcleavage mainly on {100} planes and a microshearing on {111} planes. A new physical modelization is proposed to explain the brittle transgranular cracking. It is based on the influence of the localized anodic dissolution on the enhancement of the plasticity at the crack tip. The formation of dislocation pile-ups and the conditions of restricted slip induce …
Intergrain Effects in the AC Susceptibility of Polycrystalline LaFeAsO_{0.94}F_{0.06}
2010
The AC susceptibility, chi, at zero DC magnetic field of a polycrystalline sample of LaFeAsO_{0.94}F_{0.06} (Tc ≈ 24 K) has been investigated as a function of the temperature, the amplitude of the AC magnetic field (in the range Hac = 0.003 Oe - 4 Oe) and the frequency (in the range f = 10 kHz - 100 kHz). The chi(T) curve exhibits the typical two-step transition arising from the combined response of superconducting grains and intergranular weak-coupled medium. The intergranular part of chi strongly depends on both the amplitude and the frequency of the AC driving field, from few Kelvin below Tc down to T = 4.2 K. Our results show that, in the investigated sample, the intergrain critical cur…
Droplet cell investigation of intergranular corrosion on AA2024
2017
An original method combining a droplet cell with direct optical interrogation of the reverse side of a 50μm thick foil AA2024 has been tested to evaluate the possible analysis of the current during intergranular corrosion tests. The foil microstructure and the selected orientation were suitable for recording the current generated during the propagation in volume of a well-defined grain boundary trace. Even if it is impossible to reach a charge and mass balance from these preliminary attempts, it was demonstrated that it is possible, despite hydrogen evolution, to record a current transient resulting from the full penetration of an intergranular path. Keywords: Intergranular corrosion, Alumi…
The pore structure of compacted and partly saturated MX-80 bentonite at different dry densities
2014
Compacted MX-80 bentonite is a potential backfill material in radioactive-waste repositories. Pore space in MX-80 has been the subject of considerable debate. 3D reconstructions of the pore space based on tomographic methods could provide new insights into the nature of the pore space of compacted bentonites. To date, few such reconstructions have been done because of problems with the preparation of bentonite samples for electron microscopy. The nanoscale intergranular pore space was investigated here by cryo-Focused Ion Beam nanotomography (FIB-nt) applied to previously high-pressure frozen MX-80 bentonite samples. This approach allowed a tomographic investigation of the in situ microstru…
A three-dimensional cohesive-frictional grain-boundary micromechanical model for intergranular degradation and failure in polycrystalline materials
2013
Abstract In this study, a novel three-dimensional micro-mechanical crystal-level model for the analysis of intergranular degradation and failure in polycrystalline materials is presented. The polycrystalline microstructures are generated as Voronoi tessellations, that are able to retain the main statistical features of polycrystalline aggregates. The formulation is based on a grain-boundary integral representation of the elastic problem for the aggregate crystals, that are modeled as three-dimensional anisotropic elastic domains with random orientation in the three-dimensional space. The boundary integral representation involves only intergranular variables, namely interface displacement di…
A grain-scale model for high-cycle fatigue degradation in polycrystalline materials
2018
Abstract A grain-scale three-dimensional model for the analysis of fatigue intergranular degradation in polycrystalline materials is presented. The material microstructure is explicitly represented through Voronoi tessellations, of either convex or non-convex domains, and the mechanics of individual grains is modelled using a boundary integral formulation. The intergranular interfaces degrade under the action of cyclic loads and their behaviour is represented employing a cohesive zone model embodying a local irreversible damage parameter that evolves according to high-cycle continuum damage laws. The model is based on the use of a damage decomposition into static and cyclic contributions, a…
Relation between grain size and hydrogen diffusion coefficient in an industrial Pd–23% Ag alloy
1999
Abstract The diffusion mechanism of hydrogen in an industrial cold worked Pd–23% Ag alloy is investigated according to its grain size. The microstructural parameters are determined by X-ray diffraction analysis and the diffusion parameters are determined using the galvanostatic electrochemical permeation technique. Two diffusion mechanisms are displayed. For apparent grain size below 40 nm the hydrogen atoms diffuse in the grain boundaries. For grain size above 100 nm, an intergranular diffusion mechanism occurs. For intermediate grain size both mechanisms coexist. Furthermore, the diffusion in the grain boundaries is not faster than the diffusion in the bulk, as generally observed for pure…
Modelling intergranular and transgranular micro-cracking in polycrystalline materials
2018
Abstract In this work, a grain boundary formulation for intergranular and transgranular micro-cracking in three-dimensional polycrystalline aggregates is presented. The formulation is based on the displacement and stress boundary integral equations of solid mechanics and it has the advantage of expressing the polycrystalline problem in terms of grain boundary variables only. The individual grains within the polycrystalline morphology are modelled as generally anisotropic linear elastic domains with random spatial orientation. Transgranular micro-cracking is assumed to occur along specific cleavage planes, whose orientation in space within the grains depend upon the crystallographic lattice.…
Influence of the microstructure and laser shock processing (LSP) on the corrosion behaviour of the AA2050-T8 aluminium alloy
2011
International audience; The corrosion behaviour of AA2050-T8 was studied after polishing and after laser shock processing (LSP) treatment using the electrochemical microcell technique and the SVET. After polishing, pitting at constituent particles and intergranular corrosion were observed. By contrast, no intergranular corrosion developed after LSP. Microcell measurements revealed that LSP increases the pitting potential. SVET measurements revealed that local anodic currents are systematically lower on LSP-treated surfaces than on polished ones. The current density on the LSP-treated surface remains constant around 50 μA cm−2 up to 123 min after immersion, while on the polished surface it r…
A microstructural model for homogenisation and cracking of piezoelectric polycrystals
2019
Abstract An original three-dimensional generalised micro-electro-mechanical model for computational homogenisation and analysis of degradation and micro-cracking of piezoelectric polycrystalline materials is proposed in this study. The model is developed starting from a generalised electro-mechanical boundary integral representation of the micro-structural problem for the individual bulk grains and a generalised cohesive formulation is employed for studying intergranular micro-damage initiation and evolution into intergranular micro-cracks. To capture the electro-mechanical coupling at the evolving damaging intergranular interfaces, standard mechanical cohesive laws are enriched with suitab…